Page 1 of 1

Problems with filters

Posted: 06 May 2021, 16:19
by Ivaneck
Hello,

Please, how this case can be explained? :

Image

This folder, \System Volume Information, is filtered, as you can see here:

Image

I have a similar case with a file, D:\Files\PCrypt.VCdsk. It contains an encrypted volume. This volume is always mounted as the P: disk unit. At 300 GB, it is not a candidate to be synchronized every day. It is better to synchronize its contents.

To make with AllSync the backup of this file, I mount E:\Files\PCrypt.VCdsk, the file in the AllSync's 'Destination' unit, as Q:. Then, I synchronize from P: to Q:. In this context, D:\Files\PCrypt.VCdsk and E:\Files\PCrypt.VCdsk should be excluded from any Synchronization process:

Image

, but I get errors and I'm unable to set the filters properly:

Image

Image

I would be very grateful if you could give me a hand with these questions.

Joan
AllSync 3.5.142 Business Edition

Re: Problems with filters

Posted: 06 May 2021, 19:29
by Administrator
The pictures at your post are not visible...

Why do you want to exclude files from the drive D: and E: if you synchronize files from P: to Q: ?

Re: Problems with filters

Posted: 06 May 2021, 20:28
by Ivaneck
Excuse me. Repeating post from here, with images as attachments:

Hello,

Please, how this case can be explained? :
Picture1.jpg
This folder, \System Volume Information, is filtered, as you can see here:
Picture2.jpg

Re: Problems with filters

Posted: 06 May 2021, 20:29
by Ivaneck
I have a similar case with a file, D:\Files\PCrypt.VCdsk. It contains an encrypted volume. This volume is always mounted as the P: disk unit. At 300 GB, it is not a candidate to be synchronized every day. It is better to synchronize its contents.

To make with AllSync the backup of this file, I mount E:\Files\PCrypt.VCdsk, the file in the AllSync's 'Destination' unit, as Q:. Then, I synchronize from P: to Q:. In this context, D:\Files\PCrypt.VCdsk and E:\Files\PCrypt.VCdsk should be excluded from any Synchronization process:
Picture3.jpg
, but I get errors and I'm unable to set the filters properly:
Picture4.jpg
Picture5.jpg
I would be very grateful if you could give me a hand with these questions.

Joan
AllSync 3.5.142 Business Edition

Re: Problems with filters

Posted: 06 May 2021, 20:30
by Ivaneck
Administrator wrote: 06 May 2021, 19:29 Why do you want to exclude files from the drive D: and E: if you synchronize files from P: to Q: ?
These files in D: and E: are containers. They contain encrypted disk volumes, mounted as P: and Q:

VeraCrypt - Creates a virtual encrypted disk within a file and mounts it as a real disk.
https://www.veracrypt.fr/code/VeraCrypt

Perhaps with pictures it will be easier to understand the issue. If not, please do not hesitate to ask any questions you may have.

Re: Problems with filters

Posted: 07 May 2021, 07:29
by Administrator
We tried to reproduce this error, but our filter is working fine:

folder filter.png

Deactivate the 2. option at the rules for deleting files and folders:

delete rules.png
delete rules.png (5.13 KiB) Viewed 14992 times

Re: Problems with filters

Posted: 08 May 2021, 00:30
by Ivaneck
It works!! Thanks!